)

Best design to fit specific high ground water installation

Best design to fit specific high ground water installation

Posted on 14 Apr 2015 by Christel Astakhoff

Fitted to specific high ground water installation

Our Research and Development team has developed the best design to fit specific high groundwater installation conditions that our tanks face in Europe, particularly in the United Kingdom.

Unlike other small sewage treatment systems which are not suitable for high groundwater conditions, BIOROCK plants can be installed in the high water tables or high groundwater sites by one of our trained installers.

Reinforced HDPE tanks

Our reinforced HDPE tanks will resist high groundwater pressure extremely well. The strength of our ultra-strong tanks has been tested through the Wet Pit Test where our tanks were submerged in a swimming pool to a level above the inlet pipe, imitating a submersion to groundwater.

The inside reinforcements of our HDPE tanks have been designed accordingly in order to avoid bending, cracking, or popping up.

25 years warranty

At BIOROCK we think that the EN12566-3 Wet Pit Test could not be an option to secure the 25 years warranty of our tanks.  If our tanks would not have passed this test, we would have had no confidence in this unique 25 years warranty.

This high groundwater question is so sensitive that a specific “agrément” was created in France to test the resistance of the sewage treatment tanks to ground and water pressure. BIOROCK has passed this test successfully.

Our Wet Pit Certificate is available here.

Last 25 blogs

Show more blogs